MSRの技術紹介

マイクロスリット０．４

Microslit that is one of the core technologies of MSR has the history of 15 years, thinness has 1000μ of a super-thickness from 4μ, a metallic foil sticking film compound film, and variegated results, and feel free to consult, please.

ReadMore

プラズマ放電　フィルム表面処理

It is very effective to increase the area that the adhesive touches for the adhesive power improvement. Adhesive power actually improves if the ruggedness can be processed to the film. It has the processing method of making two kinds of of surfaces a ruggedness in MSR.

ReadMore

高温ラミネート

The material is pasted while melting the material by the high temperature and
it suits it.

The effect that the adhesive cannot be used with environmental problems, the high temperature calorie has not sufficed so far, and the material that was not able to be pasted is big at the high temperature is demonstrated.

ReadMore

スクラッチブラスト

an electric electrical discharge of plasma and making the surface a rough side by the machine processing, and the slipping character increases. It is possible to produce the permanent adhesive power that was to have been done in electric processing.

Because it succeeds in making the material that doesn't slip easily by changing
the roughened surface rough either slippery

Can help our specific technology to your development well by me.

ReadMore

高温エンボス

A heatproof film can also do emboss at the ultra high temperature of 400 degrees as shown in the
image.
Value can be made by changing the aspect as important parts though emboss is usually used for the
process.

ReadMore

シートカッティング

It is very effective to increase the area that the adhesive touches for the adhesive power improvement. Adhesive power actually improves if the ruggedness can be processed to the film. It has the processing method of making two kinds of of surfaces a ruggedness in MSR.

ReadMore

多彩なラミネート技術

Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt

ReadMore

ナーリング

Narlling is a function processing that defends an important central part by raising the edge of the film by emboss more than the center part.

ReadMore

洗浄

There are roughly separately four kinds of washing.
The Nano crossing washing and the plasma electrical discharge washing
are done to the main current in MSR.

ReadMore

シートラミネート

I want to correspond by the sheet style until the amount for which you hope
increases.

It is sheet lamination corresponding to the demand such as not being possible to
process it in the process of the roll.

ReadMore

ミシンスリット

The cost and the quality raised the level by processing ruled line +
slit simultaneously.

The kind of the ruled line slit is also abundant
and inquire even a small thing, please.

ReadMore

オシレーションスリット

A hard band can be thinned from a fixed position by doing the slit while forming a special swing
curve.

The curve (swing) is too strong or too weak as notes, and the slit edge side is shaggy and the film breaking is generated. The swing curve suitable from current practice to the material is offered in MSR and the development support is done.

ReadMore

精度（マイクロレベルの世界）

A concept of the past development changes by making it visible to a microlevel.

ReadMore